LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (DECKLID, Hatch, Liftgate &Tailgate) >> Trim Panel >> Installation

Trim Panel: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place liftgate trim panel in position on vehicle.
  2. Engage hidden clips to hold trim panel to lift-gate and fasteners around perimeter of liftgate (Figure ).
  3. Connect wire connector into lamp.
  4. Install courtesy lamps into liftgate trim.
  5. Install screws to hold assist handle to liftgate.
  6. Install upper frame side moldings.
  7. Install liftgate upper frame molding.
  8. Install the bolt attaching the lifgate motor link and tighten to 28 N.m (21 ft. lbs.)
scientia non olet · About LEMON Manuals