LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (DECKLID, Hatch, Liftgate &Tailgate) >> Support Cylinder >> Installation

Support Cylinder: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.

Ensure that the cylinder end is attached to the D-pillar and the shaft end is attached to the liftgate.

  1. Place prop assembly in position.
  2. Install bolt attaching prop assembly to liftgate.
  3. Install bolt attaching end pivot to D-pillar. Tighten bolts to 28 N.m (21 ft. lbs.) torque.
  4. Install liftgate opening weatherstrip to D-pillar flange next to prop assembly end pivot.
  5. Close liftgate. Check liftgate operation.
scientia non olet · About LEMON Manuals