LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (Fuel Injection System) >> Throttle Body >> Installation

Throttle Body: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new gasket, if required.
  2. Install throttle body.
  3. Tighten throttle body mounting bolts. The 2.4L to 28.2 N.m (250 +/-50 in. lbs.) torque, The 3.3/3.8L to 11.6 N.m (105 +/-20 in. lbs.) torque.
  4. Connect electrical connectors to the idle air control motor and throttle position sensor (TPS) (Figure) or (Figure).
  5. Install air inlet to throttle body hose clamp and tighten.
  6. Connect negative cable to battery cable.
scientia non olet · About LEMON Manuals