LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 225 (Lighting System - Exterior) >> Tail Lamp Unit >> Installation

Tail Lamp Unit: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reconnect wire harness connector to the tail lamp. Slide red connector lock into position.
  2. Engage hook into rubber grommet in quarter panel opening.
  3. Place lamp into position on quarter panel.
  4. Insert the two retaining fasteners by pressing into position (insert into the hole first, followed by the slot). Ensure that the head of the fastener is open before inserting.
  5. Close the liftgate.
  6. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals