LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Heated Glass) >> Rear Window Defogger Relay >> Installation

Rear Window Defogger Relay: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Refer to the fuse and relay layout map molded into the inner surface of the Integrated Power Module (IPM) cover for rear window defogger relay identification and location.
  2. Position the rear window defogger relay into the proper receptacle in the IPM.
  3. Align the rear window defogger relay terminals with the terminal cavities in the IPM receptacle.
  4. Push down firmly on the rear window defogger relay until the terminals are fully seated in the terminal cavities in the IPM receptacle.
  5. Install the cover onto the IPM.
  6. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals