LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Power Liftgate System) >> Liftgate Light Bar >> Installation

Liftgate Light Bar: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the liftgate light bar wiring harness through liftgate.
  2. Line up the four liftgate light bar retaining screws and install (Figure ) and (Figure ).
  3. Connect the liftgate light bar electrical connector inside the liftgate.
  4. Install the liftgate inner trim panel (Refer to TRIM PANEL  ).
  5. Connect the battery negative cable.
  6. Verify vehicle and system operation.
  7. Close hood.
scientia non olet · About LEMON Manuals