LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Power Liftgate System) >> Latch >> Removal

Section 205 (Power Liftgate System): Latch: Removal

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove liftgate trim panel.
  2. Disengage outside handle link from clip on latch.
  3. Disconnect wire connector from liftgate latch (Fig 1 ).
  4. Remove screws attaching latch to liftgate.
  5. Remove latch from vehicle.
    Fig 1: Removing Liftgate Latch
    G03571772Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals