LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Power Liftgate System) >> Hinge >> Removal

Section 205 (Power Liftgate System): Hinge: Removal

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release liftgate latch and open liftgate.
  2. Support liftgate on a suitable lifting device in the full open position.
  3. Using a grease pencil or equivalent, mark the hinge location.
  4. Remove nuts attaching liftgate hinge to roof header (Fig 1 ).
    Fig 1: Removing Liftgate Hinge
    G03571771Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove bolts attaching hinge to liftgate.
  6. Remove hinge from vehicle.
scientia non olet · About LEMON Manuals