LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Fuel Injection System) >> Throttle Body >> Removal

Throttle Body: Removal

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative cable from battery
  2. Remove the engine cover.
  3. Remove the air cleaner box, (Refer to AIR CLEANER HOUSING ).
  4. Hold throttle lever in wide open position. Remove throttle cable and speed control cables from throttle arm.
  5. Remove throttle cable bracket (Fig 1 ).
    Fig 1: Identifying Throttle Body Bracket
    G03572860Courtesy of DAIMLERCHRYSLER CORP.
  6. Disconnect electrical connectors from throttle body (Fig 2 ).
    Fig 2: Identifying Throttle Body, TPS, & IAC
    G03572861Courtesy of DAIMLERCHRYSLER CORP.
  7. Remove 3 throttle body bolts.
  8. Remove throttle body (Fig 3 ).
    Fig 3: Removing Throttle Body
    G03572862Courtesy of DAIMLERCHRYSLER CORP.
  9. Clean mating surfaces.
scientia non olet · About LEMON Manuals