LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (Navigation System & Telecommunication System) >> Antenna Cable - Navigation >> Removal

Antenna Cable - Navigation: Removal

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove right side cowl trim (Refer to INTERIOR .
  3. Remove right side front and rear sill scuff plates (Refer to INTERIOR ).
  4. Remove right side quarter trim panel (Refer to INTERIOR ).
  5. Remove liftgate scuff plate (Refer to INTERIOR ).
  6. Remove navigation unit (Refer to REMOVAL  ).
  7. Disconnect antenna cable at instrument panel. Remove cable from retainers on floor. Disconnect antenna cable from navigation unit.
scientia non olet · About LEMON Manuals