LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Power Door Locks) >> Driver Cylinder Lock Switch >> Removal

Driver Cylinder Lock Switch: Removal

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the door trim panel (Refer to TRIM PANEL ).
  3. Peel back the water deflector to expose switch.
  4. Close the door window.
  5. Disconnect the door cylinder lock switch wire connector from the door harness, and wiring clip from the security shield.
  6. Remove the switch from the key cylinder in the door handle and remove from vehicle.
scientia non olet · About LEMON Manuals