LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (Interior) >> Body Vent >> Installation

Body Vent: Installation

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the vent into the vent hole in the cab back panel.
  2. Twist the vent and pull it into the hole frame and seat the tabs fully.
  3. Install the cab back panel trim. (Refer to INSTALLATION  )
scientia non olet · About LEMON Manuals