LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Fuel Injection - Diesel Engine) >> Camshaft Position Sensor >> Installation

Camshaft Position Sensor: Installation

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean out machined hole in back of timing gear housing (cover).
  2. Apply a small amount of engine oil to sensor o-ring.
  3. Install sensor into timing gear housing (cover) with a slight rocking action. Do not twist sensor into position as damage to o-ring may result.
    CAUTION: Before tightening sensor mounting bolt, be sure sensor is completely flush to back of timing chain housing (cover). If sensor is not flush, damage to sensor mounting tang may result.
  4. Install mounting bolt and tighten. Refer to SPECIFICATIONS .
  5. Connect electrical connector to sensor.
scientia non olet · About LEMON Manuals