Section 135 (4.7L Engine (Service Information)): Engine-4.7L: Specifications: Torque
WARNING: This page is about a different car, the 2004 Dodge Pickup. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | ||
|---|---|---|---|---|---|
| Camshaft Non - Oiled Sprocket Bolt Bearing Cap Bolts |
122 11 |
90 - |
- 100 |
||
| Timing Chain Cover-Bolts | 58 | 43 | - | ||
| Connecting Rod Cap-Bolts | 27 | 20 | - | ||
| PLUS 90° TURN | |||||
| Bed Plate-Bolts | Refer to Procedure | ||||
| Crankshaft Damper-Bolt | 175 | 130 | - | ||
| Cylinder Head Bolts | Refer to Procedure | ||||
| Cylinder Head Cover-Bolts | 12 | - | 105 | ||
| Exhaust Manifold-Bolts | 25 | 18 | - | ||
| Exhaust Manifold Heat Shield-Nuts | 8 | - | 72 | ||
| Then loosen 45° | |||||
| Flexplate-Bolts | 60 | 45 | - | ||
| Engine Mount Bracket to Block-Bolts | 61 | 45 | - | ||
| Rear Mount to Transmission-Bolts | 46 | 34 | - | ||
| Generator Mounting-Bolts M10 Bolts M8 Bolts |
54 28 |
40 - |
- 250 |
||
| Intake Manifold-Bolts | 12 | - | 105 | ||
| Refer to Procedure for Tightening Sequence | |||||
| Oil Pan-Bolts | 15 | - | 130 | ||
| Oil Pan-Drain Plug | 34 | 25 | - | ||
| Oil Pump-Bolts | 28 | - | 250 | ||
| Oil Pump Cover-Bolts | 12 | - | 105 | ||
| Oil Pickup Tube-Bolt and Nut | 28 | - | 250 | ||
| Oil Dipstick Tube to Engine Block-Bolt | 15 | - | 130 | ||
| Oil Fill Tube-Bolts | 12 | - | 105 | ||
| Timing Chain Guide-Bolts | 28 | - | 250 | ||
| Timing Chain Tensioner Arm-Special Pin Bolt | 17 | - | 150 | ||
| Hydraulic Tensioner-Bolts | 28 | - | 250 | ||
| Timing Chain Primary Tensioner-Bolts | 28 | - | 250 | ||
| Timing Drive Idler Sprocket- Bolt | 34 | 25 | - | ||
| Thermostat Housing-Bolts | 13 | - | 115 | ||
| Water Pump-Bolts | (1) | - | - | ||
|
|||||