LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Power Distribution) >> IOD Fuse >> Removal

IOD Fuse: Removal

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The Ignition-Off Draw (IOD) fuse is disconnected from Integrated Power Module fuse cavity # 51 when the vehicle is shipped from the assembly plant. Dealer personnel must reconnect the IOD fuse when the vehicle is being prepared for delivery in order to restore full electrical system operation.

  1. Turn the ignition switch to the Off position.
  2. Remove the Integrated Power Module cover.
  3. Grasp the outer tabs of the IOD fuse holder unit in fuse cavity #51 between the thumb and forefinger and pull the unit firmly upward.
  4. Install the Integrated Power Module cover.
scientia non olet · About LEMON Manuals