LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Power Door Locks) >> Remote Keyless Entry Transmitter >> Standard Procedure >> Standard Procedure - RKE Transmitter Customer Preferences >> Unlock Sequence

Unlock Sequence

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The unlock sequence can be toggled using a DRB III(R) or by using the Remote Keyless Entry (RKE) transmitter that is already programmed to the vehicle.

To toggle between Driver door first and Unlock all doors function:

  1. Enter the vehicle and close all doors.
  2. Fasten the seat belt (this will cancel the seat belt chime).
  3. Turn the ignition to the ON position.
  4. Press and hold the UNLOCK button for 4 seconds. Within 6 seconds with the UNLOCK button still depressed, press the LOCK button. When a single chime is heard, release both buttons.
  5. Turn the ignition OFF.
  6. Turn the ignition ON or wait 60 seconds.

If a chime is not heard, program mode was canceled before the feature could be disabled. If necessary, repeat the procedure.

To toggle this feature, repeat the above procedure.

scientia non olet · About LEMON Manuals