Optical Chirp (Flash) Disabling / Enabling
WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The optical chirp can be toggled using a DRB III(R) or by using the Remote Keyless Entry (RKE) transmitter that is already programmed to the vehicle.
To DISABLE (cancel) the optical chirp feature:
- Enter the vehicle and close all doors.
- Fasten the seat belt (this will cancel the seat belt chime).
- Turn the ignition to the ON position.
- Press and hold the LOCK button for 4 seconds. Within 6 seconds with the LOCK button still depressed, press the PANIC button. When a single chime is heard, release both buttons.
- Turn the ignition OFF.
- Turn the ignition ON or wait 60 seconds.
- Test the optical chirp feature by pressing the LOCK button.
If a chime is not heard, program mode was canceled before the feature could be disabled. If necessary, repeat the procedure.
To ENABLE the optical chirp feature, repeat the above procedure.