LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Power Door Locks) >> Power Lock Switch >> Removal

Power Lock Switch: Removal

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The power lock switch on the driver side front door trim panel is integral to the driver door module. (Refer to REMOVAL  ).

  1. Disconnect and isolate the battery negative cable.
  2. Remove the door trim panel (Refer to TRIM PANEL ).
  3. Remove the switch from the trim panel bezel.
scientia non olet · About LEMON Manuals