LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 125 (Ignition Control) >> Ignition Coil Capacitor >> Removal

Ignition Coil Capacitor: Removal

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The coil capacitor is located in the right-rear section of the engine compartment. It is attached with a mounting stud and nut.

  1. Disconnect electrical connector at capacitor (Fig 1).
    Fig 1: Removing Capacitor
    G03564058Courtesy of DAIMLERCHRYSLER CORP.
  2. Remove mounting nut and remove ground strap.
  3. Remove capacitor.