LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 125 (Ignition Control) >> Automatic Shut Down Relay >> Removal

Automatic Shut Down Relay: Removal

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The ASD relay is located in the Power Distribution Center (PDC) (Fig 1). Refer to label on PDC cover for relay location.

Fig 1: Identifying PDC Location
G03564022Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove PDC cover.
  2. Remove relay from PDC.
  3. Check condition of relay terminals and PDC connector terminals for damage or corrosion. Repair if necessary before installing relay.
  4. Check for pin height (pin height should be the same for all terminals within the PDC connector). Repair if necessary before installing relay.