LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Battery System) >> Battery Tray >> Installation >> Left Side

Left Side

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the battery tray assembly and install the retaining bolts.
  2. Connect the left front fender ground wire.
  3. Install the purge solenoid on its mounting bracket.
  4. Install the battery temperature sensor in the battery tray (Refer to BATTERY TEMPERATURE SENSOR ).
  5. Install the cruise servo (if equipped) and retaining screws.
  6. Install the left front wheelhouse splash shield (Refer to FRONT WHEELHOUSE SPLASH SHIELD ).
  7. Install the anti-lock brake controller (if equipped).
  8. Connect the wire harness retainers on the battery tray assembly.
  9. Install the integrated power module (Refer to INTEGRATED POWER MODULE ).
  10. Install the battery (Refer to INSTALLATION  ).
scientia non olet · About LEMON Manuals