LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Battery System) >> Battery Cables >> Removal

Battery Cables: Removal

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to the Off position. Be certain that all electrical accessories are turned off.
  2. Disconnect and isolate the remote battery negative cable terminal.
  3. Remove the battery from the vehicle. Refer to REMOVAL  .
  4. One at a time, trace the battery cable retaining pushpins, fasteners and routing clips until the cable is free from the vehicle.
  5. Remove the battery cable from the engine compartment.
scientia non olet · About LEMON Manuals