LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Brakes Abs) >> Rear Wheel Speed Sensor >> Installation

Rear Wheel Speed Sensor: Installation

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the harness to the sensor. Be sure the seal is securely in place between the sensor and the wiring connector. 
  2. Install the O-ring on the sensor (if removed).
  3. Insert the sensor in the differential housing.
  4. Install the sensor shield.
  5. Install the sensor mounting stud and tighten to 24 N.m (200 in. lbs.).
  6. Install the brake line on the sensor stud and install the nut.
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals