LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Body Diagnostic Procedures) >> System Description And Functional Operation >> Overhead Console >> Tire Pressure Monitoring System (TPM) >> System Faults

System Faults

WARNING: This page is about a different car, the 2003 Dodge Grand Caravan, 2003 Dodge Caravan, 2003 Chrysler Voyager, and 2003 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.

There are two conditions that will cause a Tire Pressure Monitoring System fault to be set. All fault codes are associated with a specific wheel location.

  1. If the EVIC detects a non-transmitting Sensor/Transmitter condition, it will:
    1. Store an active fault code.
    2. Request a chime
    3. Display "SERVICE TIRE PRESS. SYSTEM".
  1. When the EVIC receives a Low Sensor/Transmitter battery report from a Sensor/Transmitter, it will:
    1. Store an active fault code.
    2. Request a chime.
    3. Display "SERVICE TIRE PRESS. SYSTEM".

    Use the DRBIII® Inputs/Outputs function to further isolate the specific concern. The DRBIII® can be queried to determine the status and battery condition for each Sensor/Transmitter.

scientia non olet · About LEMON Manuals