LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> 42RLE Automatic Transmission - Electrical Diagnostics >> DTC Troubleshooting >> P0602 - Control Module Programming Error/Not Programmed >> Theory Of Operation

Theory Of Operation

The controller is programmed during manufacturing with generic software to facilitate testing. This software does not have the proper calibrations to control a transmission in a vehicle. The check for generic software is made at power-up. If generic software is found , the MIL will light immediately and the MIL will stay on even if the fault is cleared, until the proper software is installed. Note: Transmission will be placed in limp-in mode.