LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Navigation System & Telecommunication System (Service Information) >> Hands Free Module >> Installation

Hands Free Module: Installation

Fig 1: Removing/Installing Hands Free Module
GC0016217Courtesy of DAIMLERCHRYSLER CORP.
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. (Refer to ELECTRICAL/BATTERY SYSTEM - STANDARD PROCEDURE) .
  1. Position hands free module. Install and tighten mounting fasteners.
    Fig 2: Disconnecting/Connecting Hands Free Module Connector
    GC0016218Courtesy of DAIMLERCHRYSLER CORP.
  2. Connect wire harness connector.
  3. Install glove box.
  4. Connect battery negative cable.
scientia non olet · About LEMON Manuals