LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Door Module >> Installation

Door Module: Installation

Fig 1: DOOR MODULE LOCATION
GC0015854Courtesy of DAIMLERCHRYSLER CORP.
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. (Refer to ELECTRICAL/BATTERY SYSTEM - STANDARD PROCEDURE) .
  1. Position module.
  2. Install and tighten mounting fasteners.
  3. Connect electrical harness connectors.
  4. Install door trim panel (Refer to BODY/DOOR - FRONT/TRIM PANEL - INSTALLATION) .
  5. Connect battery negative cable.
scientia non olet · About LEMON Manuals