LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Town & Country Base >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Memory Systems >> Removal & Installation >> Memory Set Switch >> Installation

Memory Set Switch: Installation

  1. Position the memory switch and install and tighten the 2 screws that secure the memory switch to the back of the driver side front door trim panel switch bezel. Tighten the screws to 20 INCH lbs. (2.2 N.m).
  2. Reconnect the memory switch wire harness connector to the memory switch.
  3. Install the trim panel switch bezel onto the driver side front door.
  4. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals