LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Sebring LXi, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Audio System - Except Coupe) >> Amplifier >> Installation

Section 140 (Audio System - Except Coupe): Amplifier: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect wire harness connector to amplifier.
  2. Install amplifier. Tighten the forward screw to 3 N.m (26.5 in. lbs.) and the rear nut to 2 N.m (18 in. lbs.).
  3. Connect battery negative cable.
scientia non olet · About LEMON Manuals