LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Sebring GTC, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules - Except Coupe >> Transmission Control Module >> Removal

Transmission Control Module: Removal

NOTE: If the transmission control module (TCM) is being replaced with a new or replacement unit, the Pinion Factor and Quick Learn procedures must be performed. (Refer to STANDARD PROCEDURE )
  1. Disconnect battery negative cable at strut tower.
  2. Remove air cleaner assembly and transmission control module (TCM)-to-powertrain control module (PCM) bracket nut.
  3. Partially remove air cleaner assembly to clear PCM bracket stud.
  4. Remove TCM-to-PDC bracket screw (Fig 1).
    Fig 1: Removing TCM/Bracket Assembly
    G03614967Courtesy of DAIMLERCHRYSLER CORP.
  5. Partially remove TCM/mounting bracket assembly and disconnect TCM 60-way connector.
  6. Remove TCM/mounting bracket assembly (Fig 1).
  7. Remove TCM mounting bracket from TCM (Fig 2).
    Fig 2: Removing TCM And Mounting Bracket
    G03614968Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals