LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Sebring Base, 2D Coupe, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Electronic Control Modules - Except Coupe) >> Heated Seat Module >> Installation

Heated Seat Module: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Position the heated seat module under the seat.
  2. Connect the wire harness connector on the back of the heated seat module.
  3. Reposition the drivers power seat track.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals