Fluid Capacities

TRANSAXLE FLUID CAPACITIES

Application

Refill - Qts. (L)

Dry Fill - Qts. (L)

Transaxle

⁽²⁾ 4.0 (3.8)

9.7 (9.2)

AWD Power Transfer Unit

1.05 (1.0)

⁽¹⁾	Approximate quantities listed.

⁽²⁾

Add specified amount of fluid. Start engine and allow it to idle for at least one minute. With brakes applied, shift transaxle through all gear ranges and return to Park. Add additional fluid to bring level to 1/8" below ADD mark on dipstick. Recheck fluid level with transaxle at normal operating temperature. Adjust fluid level to within HOT range on dipstick.