LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Rear Driveline Module) >> Output Seal >> Removal

Output Seal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Raise vehicle on hoist.
  2. Remove rear driveline module. (Refer to REMOVAL  )
  3. Use suitable screwdriver to remove output seal (Fig 1 ).
    Fig 1: Removing Axle Seal
    G03571344Courtesy of DAIMLERCHRYSLER CORP.