Input Flange Seal: Removal

WARNING: This page is about a different variant/trim than selected.

Raise vehicle on hoist.
Remove propeller shaft. (Refer to PROPELLER SHAFT (AWD) )
Using tool 6958, loosen input flange nut (Fig 1 ).

Fig 1: Loosening Input Flange Nut
Courtesy of DAIMLERCHRYSLER CORP.
Remove input flange nut and washer (Fig 2 ) (Fig 3 )
Remove input flange (Fig 4 ).
Using suitable screwdriver, remove input flange seal from overrunning clutch housing (Fig 5 ).

Fig 2: Removing Input Flange Nut
Courtesy of DAIMLERCHRYSLER CORP.

Fig 3: Removing Input Flange Washer
Courtesy of DAIMLERCHRYSLER CORP.

Fig 4: Removing Input Flange

Courtesy of DAIMLERCHRYSLER CORP.

Fig 5: Removing Input Flange Seal

Courtesy of DAIMLERCHRYSLER CORP.