LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica FWD >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Catalytic Converter >> Installation

Catalytic Converter: Installation

  1. Position torca band clamp on the catalytic converter.
  2. Install the muffler into the catalytic converter until guide pin seats in slot on muffler.
  3. Tighten torca clamp to 54 N.m (480 in. lbs.).
  4. Install exhaust system (Refer to INSTALLATION - EXHAUST SYSTEM  ).
scientia non olet · About LEMON Manuals