LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica FWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Locks >> Driver Cylinder Lock Switch >> Removal

Driver Cylinder Lock Switch: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the door trim panel (Refer to TRIM PANEL ).
  3. Peel back the water deflector to expose switch.
  4. Close the door window.
  5. Disconnect the door cylinder lock switch wire connector from the door harness, and wiring clip from the security shield.
  6. Remove the switch from the key cylinder in the door handle and remove from vehicle.
scientia non olet · About LEMON Manuals