Camber & Caster Angle: Notes

Camber and caster settings on this vehicle are determined at the time the vehicle is designed, by the location of the vehicle's suspension components. This is referred to as NET BUILD. The result is no required adjustment of camber and caster after the vehicle is built or when servicing the suspension components. Thus, when performing a wheel alignment, caster and camber are not normally considered adjustable angles. Camber and caster should be checked to ensure they meet vehicle specifications.

If front camber does not meet alignment specifications, it can be adjusted using an available camber adjustment bolt package. Before installing a camber adjustment bolt package on a vehicle found to be outside of specifications, inspect the suspension components for any signs of damage or bending. Replace components as needed.

CAUTION: Do not attempt to adjust the vehicle's wheel alignment by heating, bending or by performing any other modification to the vehicle's front suspension components or body.

If front camber readings are not within specification, use the following procedure to install a camber adjustment bolt package, then adjust front camber.