Cluster Bezel: Removal
- Open hood, disconnect and isolate the battery negative cable.
- Remove the steering opening cover two retaining screws and cover.
- Remove the knee blocker airbag (Refer to AIR BAG RESTRAINT SYSTEMS
).
- Unsnap the left end cover and remove.
- Remove the two screws to the left lower instrument panel trim plate.
- Remove the instrument panel center bezel (Refer to REMOVAL
).
- Remove the eight retaining screws to the cluster bezel (Fig 1
).
Courtesy of DAIMLERCHRYSLER CORP.
- Using a trim stick or equivalent, gently pry out on cluster bezel around edges and remove from instrument panel (Fig 2
).
Courtesy of DAIMLERCHRYSLER CORP.
- Disconnect the electrical connector to the instrument panel switch pod (EVIC, NAV, Clock, and Hazard Switch).