LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Driveline Module >> Output Seal >> Installation

Output Seal: Installation

  1. Install output flange seal to differential housing using tool C4171A and 8493 (Fig 1 ).
    Fig 1: Installing Axle Seal
    G03571345Courtesy of DAIMLERCHRYSLER CORP.
  2. Install rear driveline module. (Refer to INSTALLATION  )
  3. Check differential assembly fluid level and adjust as required. (Refer to STANDARD PROCEDURE - DIFFERENTIAL ASSEMBLY FLUID CHANGE  )
scientia non olet · About LEMON Manuals