LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System - Rear >> Frame Closeout Molding >> Removal

Frame Closeout Molding: Removal

  1. Open door.
  2. Lower door window glass.
  3. Remove rear door trim panel. (Refer to REMOVAL ).
  4. Remove door inner belt molding weatherstrip. (Refer to REAR DOOR INNER BELT MOLDING WEATHERSTRIP ).
  5. Remove door fixed glass run channel. (Refer to REMOVAL ).
  6. Using a trim stick C-4755 or equivalent and hand pull down on front door frame closeout molding to disengage from window frame channel (Figure).
  7. Remove closeout molding from vehicle.
scientia non olet · About LEMON Manuals