LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System - Front >> Trim Panel >> Removal

Trim Panel: Removal

  1. Release door latch and open door.
  2. Lower door glass.
  3. Open remote handle trim plug and remove screw from behind inside remote handle (Fig 3 ).
  4. Open remote handle trim plug and remove screw from inside arm rest pull cup (Figure ).
  5. Disengage push-in fasteners attaching trim to door panel around perimeter of trim panel.
  6. Tilt trim panel outward to clear locator pins on backside of trim panel.
  7. Disconnect trim panel from retainer channel in inner belt weatherstrip at top of door by lifting while gently jiggling.
    Fig 1: Identifying Components Of Door Lock Tumbler
    G03571638Courtesy of DAIMLERCHRYSLER CORP.
    CAUTION: Do not allow door trim panel to hang by the wire connector or wiring.
  8. Move top of trim panel away from door, while supporting bottom trim panel. (Figure ) and (Figure ).
  9. Disconnect inside handle cable end from clip, and pull conduit end out from bracket.
    Fig 2: Removing Door Trim Panel
    G03571639Courtesy of DAIMLERCHRYSLER CORP.
  10. Disconnect lock knob conduit end from bracket. Slide cable barrel end out from the lock knob and guide cable through slot. Ensure that lock knob cable did not get kinked.
  11. Disconnect wire connector from power door lock switch, mirror switch, and power window switch.
  12. Remove trim panel from door.
    Fig 3: Removing Remote Handle Trim Plug
    G03571640Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals