LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Driver Seat Switch >> Removal

Driver Seat Switch: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the front door trim panel. Refer to TRIM PANEL .
  3. Disconnect the wire harness connector from the door module. Depress the retaining tab and pull straight apart.
  4. Press in the four clips that secure the seat switch to the door trim panel.
  5. Remove the power seat switch from the trim panel.
scientia non olet · About LEMON Manuals