LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Driver Seat Switch >> Installation

Driver Seat Switch: Installation

  1. Position the seat switch onto the door trim panel. Press into place ensuring all four clips are engaged.
  2. Reconnect the wire harness connector to the door module.
  3. Install the front door trim panel. Refer to TRIM PANEL .
  4. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals