LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Driver Power Seat Track >> Installation

Driver Power Seat Track: Installation

  1. Position the seat cushion on the seat track.
  2. Install the four seat track retaining bolts in the seat cushion pan. Torque the bolts to 28.5 N.m.
  3. Position the seat back and install the two seat back frame mounting bolts and the two seat back recliner bolts. Torque the bolts to 55 N.m.
  4. Route and connect the electrical connectors between the power seat track and the seat assembly.
  5. Install the seat side cover assembly (Refer to SEATS ).
  6. Install the rear fabric blocker trim panel on the rear of the front seat.
  7. Position the memory heated seat adjustable pedal module and connect the module electrical connectors.
  8. Install the memory heated seat adjustable pedal module retaining screws.
  9. Install the seat assembly in the vehicle (Refer to SEATS ).
scientia non olet · About LEMON Manuals