LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Power Liftgate System >> Outside Handle >> Installation

Outside Handle: Installation

  1. Route the exterior handle electrical connector through the door and position handle (Figure ).
  2. Install the two out screws liftgate handle to liftgate inner panel. Tighten screws to 8 N.m (80 in. lbs.).
  3. Connect the electrical connector.
  4. Install the trim panel. (Refer to TRIM PANEL  ).
scientia non olet · About LEMON Manuals