LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Liftgate System >> Link Rod >> Removal

Link Rod: Removal

  1. Open the liftgate.
  2. Using a small flat-bladed screwdriver, pry the plastic retainer up to release the locking mechanism from the mounting sphere. Do not try to remove the retainer, it is not designed to be removed.
  3. Remove the link rod from the liftgate mounting sphere by gently pulling off.
  4. Remove the D-pillar trim from the vehicle. Refer to D-PILLAR TRIM .
  5. Remove the link rod from the drive unit mounting sphere by gently pulling off.
scientia non olet · About LEMON Manuals