Cruise Control Systems: Servo: Removal
- Disconnect the negative battery cable.
- Remove the servo bracket bolt.
- Remove speed control cable from throttle cam by sliding clasp out hole used for throttle cable (Fig 1
).
Courtesy of DAIMLERCHRYSLER CORP.
- Remove the throttle cable (with retaining tab) and then slide cable speed control cable out from bracket.
- Disconnect electrical connectors and vacuum hose.
- Remove two nuts attaching mounting bracket and speed control cable to servo (Fig 2
).
Courtesy of DAIMLERCHRYSLER CORP.
- Pull cable away from servo to expose retaining clip and remove clip attaching cable to servo (Fig 3
).
Courtesy of DAIMLERCHRYSLER CORP.
- Remove the servo.