LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Power Liftgate System >> Liftgate Drive Unit Motor >> Diagnosis And Testing - Liftgate Motor

Diagnosis And Testing - Liftgate Motor

  1. Open liftgate and remove D-pillar trim to access the power liftgate motor. Refer to D-PILLAR TRIM .
  2. Using a DRB III® scan tool, actuate the drive unit motor to check operation. If a DRB III® scan tool is not available, connect 12 volt power and ground source jumper wires to the wires coming from the DC motor. If the motor rotates in both directions when the polarity is reversed, the motor is OK at this time.
scientia non olet · About LEMON Manuals