LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> PT Cruiser GT, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Sentry Key Immobilizer Module >> Installation

Sentry Key Immobilizer Module: Installation

NOTE: If the SKIM is replaced with a new unit, a DRB III(R) scan tool MUST be used to initialize the new SKIM and to program at least two Sentry Key transponders. See STANDARD PROCEDURE - SENTRY KEY IMMOBILIZER SYSTEM INITIALIZATION  .
  1. Place the SKIM into position.
  2. Rotate the SKIM and its mounting bracket downwards and then to the side towards the steering column (Fig. 28).
  3. Install the two screws securing the SKIM to the top of the steering column.
  4. Engage the steering column wire harness to the Sentry Key Immobilizer Module (SKIM).
  5. Install the steering column upper and lower shrouds. See STEERING COLUMN article.
  6. Install the Lower Instrument Panel Cover. See BODY article.
  7. Connect the battery negative cable.
scientia non olet · About LEMON Manuals