Input Speed Sensor: Removal

Disconnect the battery cables.
Remove air cleaner assembly. See Figure .
Remove the battery hold down clamp and remove the battery. See Figure .
Remove the battery tray. See Figure .
Disconnect input speed sensor connector.
Unscrew and remove input speed sensor. See Fig 1 .
Inspect speed sensor O-ring and replace if necessary. See Fig 1 .

Fig 1: Identifying Input Speed Sensor

G00162413

Courtesy of CHRYSLER CORP.

Fig 2: Locating Speed Sensor O-Ring

G00368160

Courtesy of CHRYSLER CORP.